One-Step multi-drug urine test panel AMP/ COC/ BZO/ THC/ KET/ ETG

General

Wondfo Multi-Drug Urine Test Panel – W2006-P

This One-Step Multi-Drug Urine Test is a drug abuse test specifically created to test for the most common drug groups: Amphetamine, Cocaine, Benzodiazepines, Marijuana, Ketamine and Ethyl Glucuronide. This Multi-Drug Urine Test is intended for use by healthcare professionals as a qualitative screening In Vitro Diagnostic test for the detection of drug abuse.

The test is a lateral flow, one-step immunoassay for the qualitative detection of specific drugs and their metabolites in human urine at the following thresholds:

The test is intended for rapid screening of intoxication in patients. It provides a qualitative preliminary test result. A more specific alternative chemical method should be applied to obtain a confirmed analytical result, preferably by Gas Chromatographic Mass Spectometry (GC/MS). Clinical consideration and professional judgment will need to be applied to any drug abuse test result and especially if the preliminary test results are positive.

Quick Guide:

Allow the test cassette, urine sample and other tools to reach room temperature before testing

1. Open the seal packaging, remove the test cassette from the packaging.
2. Remove the cap to reveal the absorbent test strips.
3. Dip the test strips into the urine sample for at least 10 to 15 seconds. Dip the test at least up to 2/3 of the length of the test strips but no deeper than the marked line on the front of the test cassette
4. Replace the cap on the test cassette and place it flat on a clean, dry, non-absorbent surface
5. Start the timer and read the result after 5 minutes. Do not read the result after 10 minutes.

* When ordering this test, the complete manual (IFU) of the One-Step Multi Drug Urine test panel test is included, read this accuracy before using the test. The IFU can also be downloaded from our website

Interpretation of the rresult:

Positive: 1 pink colored line appears in each Control box (C). No line appears in the Test box (T), indicating that measurements are above the detectable level of the corresponding drugs.

Negative: 1 pink colored line appears in each Control (C) box and 1 in the Test (T) box. This indicates that the concentration of the corresponding drugs is zero or falls below the detectable concentration.

Invalid: if no line appears in the Control box (C) or only a line in the Test box (T) then the test is invalid. Insufficient sample material or procedural errors are the most common reasons for an incorrectly administered test. Repeat the test procedure with a new test.

Note: The line width or color intensity has no meaning.

Accuracy

This rapid test has an accuracy of 97,9% where the positive test results have been confirmed by GC/GM, see the IFU for a detailed overview of the accuracy per drug group.

Storage and stability

1. Store the test devices at +4°C ~ + 30°C
2. The unopened test devices can be used stably until the best before date printed on the packaging
3. Keep the test equipment away from direct sunlight, heat and humidity
4. Use the test within 1 hour after opening the seal package
5. The test devices DO NOT FREEZE